|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EURO QUARTZ Miniature 7.5 x 5.0 x 2.25mm hermetically-sealed package Shock survivability < 100,000 g Frequency Range 460kHz to 50MHz Power Down or Enable/Disable option Testing to MIL-PRF-55310 available DESCRIPTION XO26 Series oscillators are able to survive high shocks up to 100,000g. The design consists of a hermetically sealed high-shock crystal and a CMOS compatible integrated circuit housed in 7 x 5 x 2.25mm surface mount ceramic package. SPECIFICATION Frequency Range: Supply Voltage: Output Logic: Calibration Tolerance: Frequency Stability over Temperature* Commercial (0~70C): Industrial (-40~+85C: Military (-55~+125C): Total Frequency Stability** Commercial: Industrial: Military: Output Load***: Start-up Time: Rise/Fall Time: Shock Survival: Vibration Survival: Packaging: 460kHz to 50.0MHz 1.8, 2.5, 3.3 or 5.0 Volts 10% CMOS from 5ppm at 25C XO26 Series Oscillators 7x5mm SMD High G withstanding CMOS OUTLINE & DIMENSIONS 10ppm 20ppm 30ppm 15ppm 25ppm 35ppm 15pF 10ms maximum 8ns maximum <100,000g peak, 0.5ms, 0.5 sine 20g rms, 10-2000Hz random Tray pack or tape and reel Notes: * Does not include calibration tolerances ** Frequency over temperature raltive to nominal frequency *** TTL loads and higher CMOS loads available - contact sales. Absolute Maximum Ratings Supply Voltage: -0.5 to 7.0Volts Storage Temperature: -55 to +125C Maximum Process Temperature: 260C for 10 seconds ENABLE/DISABLE, POWER DOWN, NOT CONNECTED Option Power Down Enable/Disable Not Connected Specifying Code P T Blank Pad 1* LOW HIGH LOW HIGH NC Pad 3 High Z Frequency output High Z Frequency output Frequency output SHOCK WITHSTAND Code A B C D Shock Level 5,000g 10,000g 20,000g 30,000g Code F G H Shock Level 50,000g 75,000g 100,000g PART NUMBERING Example: 50.000MHz XO26A050UMTA * Normally HIGH (internal pull-up resistor) ENABLE/DISABLE vs. POWER DOWN P - Power Down: When Pad 1 is LOW the oscillator stops running T - Enable/Disable: When Pad 1 is LOW the internal oscillator continues to run but the output (Pad 3) is in a high impedance (Z) state. Power Down: Enable/Disable: Disabled current consumption low, recovery delayed. Disabled current consumption lower than normal, Recovery immediate. Frequency Series Designation XO26 Shock Level (see table above) Stability* 100 = 100ppm 50 = 50ppm 25 = 25ppm Output Universal (CMOS) Operating Temp. Range C = Commercial I = Industrial M = Military Pad 1 Function P = Power Down T = Enable/Disable Blank = not connected Supply Voltage** Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts * ** For other stability requirements enter figure required. For other supply voltage enter required voltage. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk |
Price & Availability of 50000XO26A025UCA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |